-
Mini Red Universal Multi Pole Circuit Breaker Tagout Lockout Qvand M-K07 Mcb Locking Device
Universal MCB lockout Device
M-K07, Size: 55mm(W)×26mm(H)×19mm(D), max clamping 10mm,
need a small screw driver to install
M-K08, Size: 55mm(W)×26mm(H)×19mm(D), max clamping 10mm,
without installing tools needed.
M-K08T, Size: 55mm(W)×33mm(H)×19mm(D), max clamping 10mm,
Easily installed convenient Electrical circuit breaker without installing tools needed.Locks out most types of molded case 1-4 pole circuit breakers.
-
Electrical 480/600 Volt Clamp On Circuit Breaker For Single Pole Mccb Tagout Lockout
M-K11, Can lock handle width ≦18 mm.
Small and medium clamp-on circuit breaker lockout, can lock circuit breaker with handle widths 18mm, it is recommend to be collocated with insulated safety padlock and safety tagout.
N-K12, Can lock handle width ≦42 mm.
Medium clamp-on circuit breaker lockout, and the lock cover above is fixed by split type, which is not easy to breaker. It is recommend to be collocated with insulated safety padlock and safety tagout.
M-K13, Can lock handle width ≦72 mm.
large clamp-on circuit breaker lockout, and the lock cover above is fixed by split type, which is not easy to break, it is recommend to be collocated with insulated safety padlock and safety tagout.
-
Clamp Type Circuit Breaker Loto Lockout Security Electrical Safety Lockout
Clamp-on circuit breaker lockout
M-K11 Hole diameter: 9/32′(7.5mm). For 120-277V breaker lockout, handle width ≤ 16.5mm.
M-K12 Hole diameter: 9/32′(7.5mm). For 120-277V breaker lockout, handle width ≤ 41mm.
M-K13 Hole diameter: 9/32′(7.5mm). For 120-277V breaker lockout, handle width ≤ 70mm.
Lock body and button are made from engineering plastic strengthened nylon PA, corrosion resistance, impact resistance and temperature difference resistance (-57℃～+177℃).
Suitable for all operating conditions.
-
Tie-Bar Toggles Grip Circuit Breaker Lockout For Locking Out Multi-Pole Breakers
M-K30, Made from Nylon and glass fiber
Locks out most miniature circuit breakers
a) Made from durable ABS, temperature resistance -20℃ to +100℃.
b) Miniature circuit breakers with a lock hole distance of 13 mm.
c) Accepts lock shackles up to 9/32″ (7.5mm) in diameter.
-
Miniature Circuit Breaker Safety Switch Lock Qvand M-K08 Mcb Safety Lockout
Mould Case Circuit Breaker Lockout
M-K08, Hole diameter 10mm, need a small screw driver to install.
M-K08T, Hole diameter 10mm, without any installation tools needed.
a) Made from engineering plastic strengthened nylon PA.
b) Lock out different types of circuit breakers.
c) Size: 51mm*25mm*23mm.
d) Lock out different types of circuit breakers.
-
Electrical Circuit Breaker Lockout Loto Devices Qvand M-K05 Tag Out Electrical Mcb Lock
M-K05, Max clamp size ＜ 8mm, need screwdriver to fix it.
M-K06, Max clamp size ＜8mm, and the metal handle is tightened manual to fix it.
Universal MCB lockout Device)Made of nylon.
a) Locks out virtually all miniature ISO/DIN Pin-Out circuit breakers throughout the world.
b) Works with safety padlocks and lockout hasps.
c) Lock out 1-4 pole circuit breakers.
d) Dimensions: 45 mm x 25 mm x 10 mm.
e) 8 mm padlock hole, max clamping 8 mm. -
Mini Circuit Breaker Loto Lockout Tag Out For Safety Protections
Miniature Circuit Breaker Lockout
M-K04 TBLO (Tie Bar Lockout), no hole in breakers required.
Tie bar lockout (TBLO), direct locking can be achieve without the help of tools, it is suitable for multi-pole MCB, can be locked with 2 padlocks, it is recommend to be collocated with insulated safety padlock and safety tag out.
Lock body is made of nylon PA, no deformation, no fading, high temperature corrosion resistance, temperature difference resistance (-57℃to +177℃).
-
Miniature Circuit Breaker Lockout Qvand Pin Out Breaker Mcb Lock
M-K03 Pin out standardm2 holes required, fit up to 60 Amp.
1. Material: Glass-filled Nylon.
2. Usage: Recommended to use in combination with a padlock for added safety. And can be easily installed with the aid of a push button.
The lockouts can take padlocks with a shackle diameter up to 6 mm. -
Miniature Circuit Breaker Tagout Lockout Qvand For Electrical Insulation Lockout
M-K01, POS(Pin out standard), 2 holes required,fit up to 60 Amp, hole spacing ≤12mm.
M-K02, PIS (Pin in standard), 2 holes required.fit up to 60 Amp, hole spacing ≤12mm.
M-K03, POW(Pin Out Wide), 2 holes required, fit up to 60Amp.
M-K04, TBLO (Tie Bar Lockout), no hole in breakers required, hole spacing ≤20mm.
-
Miniature Circuit Breaker Safety Lockout For Locking Schneider Bd-D28
PIN OUT Schneider Miniature Breaker Lockout
a. The body is made from PA66+ABS.
b. For locking Schneider special circiut breaker.
c. The lockouts can take padlock with a shackle diameter up to 6mm.
d. Color: Yellow, can be customized.
-
Standard Electrical Pin Out Toggles Miniature Circuit Breaker Lock Lockout Tagout Device
POT, Locks out most miniature circuit breakers.
Size: Can fit padlock with shackle diameter ≤7mm.
Schneider accessories lock, fit for Schneider Miniature circuit breaker lock.
a) The product is made of sturdy PP and high-strength modified Nylon PA material,special processing technology makes the product more resistant.Corrosion resistant (-57℃ to +177℃), Durable thermoplastic material makes it chemically resistant and function effectively in extreme environments.
b) Suitable for most miniature circuit breakers with an opening of 11 mm or less at the handle part.
c) Single person management, lock hole diameter 7.8mm.
-
Small Safety Pin Out Loto Breaker Lockout Devices Tagout for Most Miniature Circuit Breakers
Universal MCB Lockout Device
a)Made from engineerning plastic strengthened nylon PA.
b)Suitable for single and multi-pole breakers.
c)No tools needed for installation because the lockout is easily installed.
d)Accommodate to most existing types of European and Aisa circuit breakers.
e)Should use in combination with a padlock with shackle diameter up to 8mm.
f)Stickers can be customized.